KTM / Husqvarna / GASGAS Apex Anti Vibration Bar Mounts Blue

ALL NEW AUSTRALIAN MADE ANTI-VIBRATION HANDLEBAR MOUNTS

The APEX bar mount system is the perfect answer to reducing handlebar vibrations and damping out harsh impacts coming through your hands.

Our system is unique in the way it uses 4 FULLY damped points on both the upper and lower of the contact point. Other systems use only dampers on one side which is not fully damping the vibrations like a traditional "rubber mounted bar system' on some OEM bikes. The APEX bar clamps use 8 damper cones made from cast polyurethane which offers superior reliability over natural rubber while keeping effective damping characteristics.

APEX is 100% made in Australia by MSC MOTO Including casting the polyurethane damper cones and all CNC machining work.

Suitable for bikes with a rigid mounted handlebar as standard with a M10 fixing bolt.

Bar height is only increased by 5mm and less in some cases. The overall diamentions are more compact than other damped handlebar systems allowing for accessories and steering dampers/stabilisers to be mounted to the handlebars more easily.

FEATURES

  100% Australian made with CNC machined Billet aluminium

   Lightweight without sacrificing strength (503g)

   Polyurethane resign dampers prevent twisting and reduce vibration

   Softer damper Options available

   Mount height - 40mm to centre of handlebar

   Hardware - All stainless steel fasteners

*MSC STEERING DAMPER ADAPTORS*

If you have an MSC Steering damper fitted, you will need one of the below adaptors in order to fit your Apex Bar Mounts to your bike:

CLICK HERE FOR VECTORMX ADAPTOR

CLICK HERE FOR AXIS ADAPTOR

FITMENT

KTM EXC  - All models with rigid bar clamp mounting 2000 - 2022
KTM SX  -  All models with rigid bar clamp mounting 2000 - 2015
Husqvarna TE / FE - models 2014 to 2022
Husqvarna MX models 2014 and 2015
Sherco - most models (please check your top triple clamp as some factory models with Xtrig clamps might not fit)
GASGAS 2021-2023
Beta - all models using M10 mounting bolts.

Please Note:

THIS PRODUCT WILL NOT FIT WITH KTM OR HUSQVARNA BIKES WITH THE ROUND RUBBER MOUNTS IN THE TRIPLE CLAMPS AS SEEN ON THE SX/TC MODELS. 

Below is an example of what clamps the APEX bar Mount system will fit with. The important dimension is the M10 bolt thread and the 20mm wide bar riser interface.

If your bar clamps look like this then the APEX will fit your bike. (pictured are the OEM bar clamps from a KTM EXC)